Rogers Sprayers - (Toll Free) 1-888-975-8294
Copyright (C) 2011 Rogers Sprayers, All Rights Reserved
- Polyethylene and aluminum construction
- Replaceable nonabsorbent drift-stop skirt
|
- 10" diameter smooth "no-flat" foam tires
- TP8001
VS spray tips with tip screens
- Tee-Jet diaphragm nozzle body assemblies (15psi) with 1/4 turn caps
- 1/2" nozzle feed lines and nozzle
flow indicator
- On/Off toggle switch
- Pressure gauge (0 to 100 psi)
- Manual Pressure regulator
- Pump 12 volt, 3.6 gallons per minute
- Battery
holder (12 Volt, Max 7 3/4" wide, not included)
- Height adjustable handle. Folds vertically for easy transport.
|
|
# 14302 - 10 US Gallon Tank Upgrade Kit (See WE6 on right)
This tank is a direct drop-in for the standard 5 US gallon tank that
comes standard on all WE/FE series sprayers. It provides twice the spraying time while still retaining the sprayers agility. This
part can be ordered to be installed from factory or is easily installed later.
This attachment
allows you to tow your sprayer behind a small utility vehicle outfitted with a pin hitch. The hitch attaches to a mounting bracket
located on the front castor wheel of the sprayer. Tow bar installs and removes in seconds.
*Note: It is not recommended to tow the
unit with full tank and battery installed.
The Speedometer Kit provides a reading in mph or
kph of your forward speed. This aids in the accuracy of applying specific application rates. This option can be ordered installed
from factory or later on as a kit.
# 13357 - Wand Kit
The Wand Kit is a very handy device that allows the operator to spot
spraydirectly from their WE/FE series sprayer. Includes spray wand, 25’ coil hose, ball valve, handle bar hook, and necessary fittings
to tap into existing plumbing. This option can be ordered installed from factory or as a kit.